Stistics

2014年7月30日星期三

Cowboy CB-10, CB-12, CB-16, and CB-20 Hydraulic Clicker Press

Cowboy CB-10, CB-12, CB-16, and CB-20 Hydraulic Clicker Press

The Cowboy Model CB-16 hydraulic clicker press offers an excellent combination of value and versatility.  This clicker press offers a higher tonnage alternative to other lower rated machines in the market, and yet the price of the leather clicker press is very affordable.  This hydraulic swing beam clicker press can be used to both emboss leather using an embossing plate and cut leather using steel rule cutting dies.

The CB-16 generates over 16 US tons of cutting pressure.  This hydraulic clicker press features a height adjustable beam to accommodate for different thicknesses of die stock as well as an aluminum plate on the underside of the cutting beam which is replaceable.
There are 4 different tonnages available in this series.  10 ton, 12 ton, 16 ton, and 20 ton.
The CB-16 leather clicker press features a heavy steel frame designed for industrial use cycles.  The polypropylene cutting pad on the bed of the machine is easily replaced should it become worn. 
The heavy duty hydraulic pump and cylinder of this clicker press is designed for heavy use cycles in an industrial setting.  Yet this hydraulic clicker press is priced low enough that it is easily affordable for the small shop owner.

16 tons of continuous cutting pressure insures that the CB-16 will deliver enough force to use a wide variety of small, medium, and large cutting dies of variable height and thickness.

The cutting bed is sized at approximately 17X36 inches.  The cutting beam is approximately 13 inches wide.

The hydraulic swing beam clicker press features an adjustable stroke timer which allows the user to control how long the machine takes to complete a compression cycle by virtue of the length of the stroke.  For instance if an individual were cutting with steel rule dies the cycle time can be set for the quickest time and shortest stroke.  If an individual were using the machine to emboss work using an embossing plate, the cycle timer could be set for maximum delay and longest stroke to allow for the embossing plate to leave a deep and crisp impression on the work.

The die cutting press machine has a fail safe safety mechanism built in using two joystick controllers.  Both buttons must be pressed simultaneously in order for the machine to cycle.  This keeps the operator's hands clear of the work.

The comparatively low price of the CB-16 when compared to other smaller tonnage machines in the market makes it an ideal choice for the small shop or manufacturer that is seeking a machine capable of producing higher tonnage than the 8-12 ton machines available in this price range.  A full 16 tons of power is available with the CB-16 machine at a price that is competitive with much smaller machines.

The CB-16 swing arm hydraulic cutting press runs off of commonly available 220v single phase current.  Many clicker presses of this type are made to run on 3 phase current, making them impractical for the small shop owner. The CB-16 hydraulic clicker press is set to run on 220v single phase at no additional charge.  Many sellers of these machines charge close to $1000.00 for this upgrade Try a CB-16 hydraulic swing beam clicker press for your next clicker purchase and allow us to show you the Cowboy Advantage today!!!!!!



Ryan O. Neel
Neel's Saddlery and Harness







1 条评论:

  1. Broach India - Techcellence is a leading manufacturer and exporter of broach, broaching machines and optimum quality industrial spline gauges in India.

    Broaching




























    回复删除