Winding the bobbin thread of MLK500 pattern sewing machine

Winding the bobbin thread of MLK500 pattern sewing machine

[Notice]: Please make sure to pull the upper thread out of the needle before winding the bobbin thread (as below figure)

Step 1. Click the key marked with red arrow (as below figure):

Step 3. Pass through the hole on thread stand (as below figure):

Step 4. Pass through the first hole, then go between the 2 tension plates (as below figure):

Step 5. Pass through the second hole marked with red arrow (as below figure):

Step 6. Route the thread as shown in the below figure for several times (clockwise):

Step 7. Fit the bobbin to the bobbin winder

Step 8. Push in the bobbin presser arm

Step 9. Press the left pedal switch (START) for winding the bobbin thread