How to install CowBoy CB3500 leather stitching machine
The
CB3500 leather stitching machine is good all around machine for sewing the
heaviest of leather projects. The machine will sew 3/4 inch thick heavy leather
with ease. It is an ideal leather sewing machine for those that will only sew
smaller leather goods such as leather belts, custom bags, knife sheaths and gun
holsters.
Set
up the stand, adjust the stand to a desired height and fix by 4 screws (see the
red arrow).
Mount
the speed reducer and servo motor, align the largest pulley (lowest speed but with
largest torque) and motor pulley.
Lock
all 4 caster wheels.
WARNING:
the machine very heavy, unlock caster wheels (movable stand) may cause damage
and injure.
Mount
the table onto stand with 4 bolts.
Mount
the leather sewing machine head onto table with 4 bolts.
Install
the flywheel (hand wheel).
Or
install the super large MEGA flywheel (optional), to slow down sewing speed and
increase needle penetration force.
Mount
the speed controller under table, and connect the big pedal (to start sewing) and
speed controller. The small pedal is for lifting presser foot lift, link to the
hook at back of machine.
Mount
the bobbin winder by 2 self-tapping screws.
When
bobbin winder in working condition, the winding wheel touching the belt.
When
the bobbin winder is off work, the winding wheel should NOT touch the belt.
The
2 black brackets are spare for mounting belt guard (optional).
Thread
your CB3500 leather stitching machine properly (illustrated on 3 pictures).
Ready
to Sew!
If
you want to convert the cylinder bed leather stitcher to a flat bed leather sewing
machine, you can mount the table top attachment (optional) by 4 long bolts.
